Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CEN – VDS instrumenten

  • Gratis verzending

  • Gratis retourneren

  • 14 dagen niet goed, geld terug!

  • Fysieke showroom

Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CENTAURI MODIFIED

€320,00
Inclusief btw Verzending berekend bij het afrekenen.

14 dagen niet goed, geld terug garantie! ✅

Bij VDS instrumenten staan wij 100% achter de producten die wij verkopen. Om dit te bevestigen hanteren wij een 14 dagen niet goed, geld terug garantie op al onze artikelen.

*Sommige artikelen uitgesloten - zie algemene voorwaarden*

Verzending & gratis retourneren!

Retourneren:
bevalt jou artikel niet? Dan kan je het binnen 14 dagen retourneren op onze kosten!

Verzending:
op voorraad in ons magazijn? Dan voor 15:00 besteld de zelfde dag verzonden.

Verzendkosten:
Gratis verzenden vanaf €75. Onder de €75 vragen wij €6,95 verzendkosten.

Verzendkosten per land:
Nederland: €6.95
Duitsland: €7.95
Belgie: €7.95
Oostenrijk: €7.95
Zwiterland: €7.95
Frankrijk: €7.95


De verzendkosten voor andere landen kunnen variëren per locatie.

Achteraf betalen met Klarna!

Wil je jou artikel eerst proberen voordat je hem betaald? Betaal dan achteraf met Klarna! Zo kan je het eerst proberen en daarna pas betalen!

De marktleider in de snelste service! 🚀

We streven ernaar om elke klant een buitengewone service-ervaring te bieden. Onze gemiddelde reactie tijd op E-mails is 4 minuten! In de chat en telefonisch zijn wij direct beschikbaar.

Authorised Reseller

Beschrijving
Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CENTAURI MODIFIED Specifications
Modernized
The original Centaur’s components were attached to the circuit board using “through-hole” techniques, with pins that go through the circuit board and are soldered on its underside. This process got the job done, but it was expensive and time-consuming. Eventually, Bill Finnegan began producing his pedals using surface-mount technology (SMT), attaching the components directly to the circuit board’s face. This is the method we used to design the Harby Centauri.

True to the original
Bill Finnegan once said of his 1N34A germanium clipping diodes that they are “… the most important factor in how the circuit sounds when it’s being used to create distortion.” As a tribute to his insight, the Centauri uses only 1N34A diodes, with an original forward voltage of 0.35v (±15%). It’s also built using the original Centaur circuit board layout and features its buffered bypass, rather than the more modern true bypass.

Technical
Original Centaur circuit with some modifications.
*Clean blend knob: achieve the perfect balance between your original signal and the harmonically rich overdrive. The clean blend knob provides you with unparalleled tonal control, allowing you to dial in just the right amount of grit while retaining the clarity of your core sound.
*Phat bass boost switch: are you craving a thicker, more powerful low-end response? Engage the phat bass boosting switch to inject your tone with an added dose of low-frequency goodness. Whether you’re laying down a solid rhythm or letting your leads soar, this feature ensures your sound remains punchy and full-bodied.
*LED clipping diode switch: tailor your overdrive texture to match your playing style using the LED clipping diode switch. Toggle between the germanium diodes to keep it authentic to the original Klon Centaur or the added LED diodes for a more gritty, harmonically rich overdriven tone. From smooth and creamy to edgy and aggressive, this switch lets you sculpt your sound with precision.
Gold-plated PCB (ENIG).
Genuine Texas Instruments op-amps (TL072).
NOS 1N34A germanium clipping diodes with original forward voltage of 0.35v (±15%).
Solid anodized aluminum knobs (volume, drive, and tone controls).
Neutrik input and output jacks.
Buffered bypass.
9v DC operation using a standard negative center power supply.

Dé muziekwinkel van 2024!

VDS Instrumenten is bekroond met de EU Business Benelux Enterprise Award 2024 in de categorie "Muziekinstrumenten Winkel van het Jaar." Deze award erkent onze inzet voor kwaliteit, deskundigheid en uitzonderlijke klantenservice.

Recente klant reviews

Goede prijs, klantgericht en vriendelijk

Naast een hele scherpe prijs ook een hele goede klantenservice. Levering was mogelijk in de week dat het mij uitkwam en communicatie daarover heel duidelijk en prettig. Pakket in goede orde ontvangen.

Wendy Jansen

Trustpilot reviews

Simpler and cheapest in Europe!

I ordered on line at VDS because was the only one to show a price lower (6%) than the huge well-known German instrument shop.
Service and delivery in Belgium was top.

Frédéric Gilmard

Trustpilot reviews

Mooie prijs en goede en snelle...

Mooie prijs en goede en snelle communicatie. De levering duurde een paar dagen langer dan je zou kunnen verwachten vanwege drukte bij PostNL, maar Mathijs reageerde heel snel en prettig op vragen en hield ons goed op de hoogte. Prima service. Aanrader. De toon maakt de muziek!

Martijn

Trustpilot reviews
Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CENTAURI MODIFIED
Harby Pedals USA

Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CENTAURI MODIFIED

€320,00
Harby Pedals USA HCEN+ overdrive-boost-buffer gitaar effect pedaal CENTAURI MODIFIED Specifications
Modernized
The original Centaur’s components were attached to the circuit board using “through-hole” techniques, with pins that go through the circuit board and are soldered on its underside. This process got the job done, but it was expensive and time-consuming. Eventually, Bill Finnegan began producing his pedals using surface-mount technology (SMT), attaching the components directly to the circuit board’s face. This is the method we used to design the Harby Centauri.

True to the original
Bill Finnegan once said of his 1N34A germanium clipping diodes that they are “… the most important factor in how the circuit sounds when it’s being used to create distortion.” As a tribute to his insight, the Centauri uses only 1N34A diodes, with an original forward voltage of 0.35v (±15%). It’s also built using the original Centaur circuit board layout and features its buffered bypass, rather than the more modern true bypass.

Technical
Original Centaur circuit with some modifications.
*Clean blend knob: achieve the perfect balance between your original signal and the harmonically rich overdrive. The clean blend knob provides you with unparalleled tonal control, allowing you to dial in just the right amount of grit while retaining the clarity of your core sound.
*Phat bass boost switch: are you craving a thicker, more powerful low-end response? Engage the phat bass boosting switch to inject your tone with an added dose of low-frequency goodness. Whether you’re laying down a solid rhythm or letting your leads soar, this feature ensures your sound remains punchy and full-bodied.
*LED clipping diode switch: tailor your overdrive texture to match your playing style using the LED clipping diode switch. Toggle between the germanium diodes to keep it authentic to the original Klon Centaur or the added LED diodes for a more gritty, harmonically rich overdriven tone. From smooth and creamy to edgy and aggressive, this switch lets you sculpt your sound with precision.
Gold-plated PCB (ENIG).
Genuine Texas Instruments op-amps (TL072).
NOS 1N34A germanium clipping diodes with original forward voltage of 0.35v (±15%).
Solid anodized aluminum knobs (volume, drive, and tone controls).
Neutrik input and output jacks.
Buffered bypass.
9v DC operation using a standard negative center power supply.

Product weergeven