HoTone FS-1 compact momentary footswitch AMPERO SWITCH, with 2 buttons

HoTone FS-1 compact momentary footswitch AMPERO SWITCH, with 2 buttons The Hotone Ampero Switch belongs to the Ampero series and is a momentary type footswitch.

The Ampero Switch is designed for not only Ampero, but also for other devices with momentary footswitch controller support. The function you can have will vary according to the device you're going to control.

Momentary type footswitch:
When we talk about a latch-type footswitch, we're referring to a kind of footswitch that remains on status once triggered on until you operate on it again. For example, a light on/off switch. Latch-type footswitch does not require continuous compression from players, which is great for switching effect pedals on/off or switching between amp channels.
Momentary footswitch is different: it remains on only as long as it is being compressed (eg a lighter with a press button). When you do a single press on a momentary footswitch, it will generate a short on-off "pulse", which is recognized as a "trigger" on most digital multi-effects for switching presets, tap tempo, toggling effects on/off, etc. So momentary footswitch is mainly for controlling a digital gear.

It's quite simple: connect the TRS jack to Ampero's EXP 2/FS jack with the attached TRS cable, then enter Global menu, find EXP 2/FS sub menu, set MODE to Dual FS. After this, you can assign any function you need to the footswitches.

The Hotone Ampero is exactly what you need if you want to extend the control of your digital gear.

Features

-Ultra-compact, lightweight dual-footswitch controller
-Your Ampero's best pal
-Can be used with other devices with external control jacks
-Momentary footswitch design – momentary footswitch support needed
-TRS Cable Included (80cm)

Specifications

Dimensions: 100mm (W) x 40mm (D) x 42mm (H)
Weight: 130g